Product code: Harley1936-1955 EL FL OEM No: 59604-55 Rigid popular rear fender
OEM No: 59604-55 19-65 Rigid rear fender features a cutout for the chain relief as on 1951-57 rigid models and accept stainless fender trim attached by clips. Fender comes with a 7/8" wide bracket and does not have a tail lamp hole. Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket. All hinged fenders must be hand fitted at the hinge and pin area. Alignment will have to be adjusted and tweaked to fit your components. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Length: 33 in. Width: 7 in. (1) Raw steel rear fender No instructions DIMENSIONS: Inside width at mounting point: 7-3/8" Outside width at mounting point: 7-9/16" Straight length: 30-1/4" Contour length: 55" popular Height: 18-1/4".
OEM No: 59604-55 19-65 Rigid rear fender features a cutout for the chain relief as on 1951-57 rigid models and accept stainless fender trim attached by clips. Fender comes with a 7/8" wide bracket and does not have a tail lamp hole. Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket. All hinged fenders must be hand fitted at the hinge and pin area. Alignment will have to be adjusted and tweaked to fit your components. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Length: 33 in. Width: 7 in. (1) Raw steel rear fender No instructions DIMENSIONS: Inside width at mounting point: 7-3/8" Outside width at mounting point: 7-9/16" Straight length: 30-1/4" Contour length: 55" popular Height: 18-1/4".